超高效液相色谱-四极杆飞行时间质谱法快速筛查睫毛用化妆品中前列腺素F2α类化合物

采用超高效液相色谱-四极杆飞行时间质谱(UPLC-Q-TOF MS/MS)技术,建立了睫毛用化妆品中9种前列腺素F2α类化合物(比马前列素、曲伏前列素、他氟前列素、他氟乙酰胺、拉坦前列素、比马前列素酸甲基酯、氯前列醇异丙基酯、15-酮-曲伏前列素、比马酰胺)的快速定性筛查方法。样品经乙腈超声提取,采用Waters ACQUITY UPLC BEH C18(2.1 mm×100 mm,1.7μm)色谱柱,以2 mmol/L甲酸铵水溶液(含0.05%甲酸)-乙腈为流动相,分离后进入四极杆飞行时间质谱,采用电喷雾离子源正离子模式(ESI+),以MSE模式进行数据采集,建立了9种前列腺素F2α类化合物的筛查数据库。9种化合物在各自质量浓度范围内线性关系良好,相关系数(r²)均大于0.99,检出限为0.075～0.75μg/g,定量下限为0.25～2.5μg/g。所建立的筛查数据库无需对照品即可对化妆品中的9种前列腺素F2α类化合物进行筛查。结果表明,该方法特异性良好,应用于48批睫毛类化妆品的定性筛查具有良好的选择性,可为化妆品中前列腺素F2α类化合物的筛查分析提供技术支...     

物理化学教学中安全工程教育的融合与内化实例*

如何强化安全工程教育是化学化工类专业高等教育的一个重要课题。通过对蒸汽锅炉爆炸、火灾爆燃事故以及锈蚀危害等3个实例的详细讲述,指出在物理化学的教学中,若适时融入相关的安全工程教育,可以使学生深刻理解安全事故发生及防范所依赖的物理化学原理,从而起到安全意识的内化作用。教学中现代教育技术的引入可以增强这一效果。     

基于Au NPs@NU-901电化学传感器检测饼干中丁基羟基茴香醚的研究

基于金属有机骨架的拓扑三维结构的高比表面积以及金纳米颗粒(Au NPS)的优异电催化活性,金纳米颗粒与金属有机框架的复合材料在电化学传感领域拥有应用潜力。该文成功合成了Au NPs@NU-901复合材料,并采用透射电镜、X射线衍射、红外光谱以及X射线光电子能谱对其进行表征。采用线性扫描伏安法和差分脉冲伏安法研究了复合材料对丁基羟基茴香醚(BHA)电化学氧化反应的催化能力。结果表明,Au NPs@NU-901对BHA的电化学氧化具有较好的催化能力。基于Au NPs@NU-901制备电化学传感器用于BHA的定量检测,BHA的氧化峰电流与其浓度在0.10~50 μmol/L范围内呈现良好线性关系,相关系数(r2)为0.994 8,检出限(S/N=3)为0.049 μmol/L,相对标准偏差(RSD)为3.6%。将该传感器应用于饼干样品中BHA的检测,加标回收率为95.6%~104%,样品检测结果与高效液相色谱法的测定结果吻合。方法的选择性好、灵敏准确,适合于饼干中BHA的检测。     

柔性双咪唑配体导向的Co(Ⅱ)⁃戊二酸金属有机骨架材料的合成、结构和性能

在水热条件下合成并表征了2例基于柔性配体构筑的Co(Ⅱ)-MOFs:{[Co(glu)(bimb)]·4H2O}n (1),[Co(glu)(bix)0.5]n (2)(H2glu=戊二酸;bimb=1,4-双(咪唑-1-基)-丁烷;bix=1,4-双(咪唑-1-基-亚甲基)-苯)。配合物1显示非穿插的(4,4)-菱形网格,通过层间氢键和π…π作用拓展为三维超分子结构。加热失水后1的结构不可逆地降解。配合物2呈现典型的柱-层状三维结构,其拓扑符号为41263,中心Co(Ⅱ)离子采用四方锥构型。此外,性质研究表明:配合物1在水溶液中对染料甲基橙具有显著的吸附活性,配合物2表现出弱的反铁磁行为。     

硫鸟嘌呤修饰的Mn:ZnS QDs磷光探针检测铂(Ⅲ)

通过水相合成法制备了硫鸟嘌呤(TG)修饰的锰掺杂硫化锌量子点(TG-Mn:ZnS QDs)。加入Pt⁴⁺后,Pt⁴⁺会与硫鸟嘌呤上的氮原子结合形成N-Pt⁴⁺配位结构附着在TG-Mn:ZnS QDs的表面,随着Pt⁴⁺浓度的增加,TG-Mn:ZnS QDs-Pt⁴⁺体系发生电子转移而导致磷光逐渐被猝灭,基于此构建了检测Pt⁴⁺的磷光探针。实验中考察了p H、时间对Pt⁴⁺猝灭TG-Mn:ZnS QDs磷光强度的影响。在最佳实验条件下,Pt⁴⁺浓度在0.06~2.4μg/mL范围内与TG-Mn:ZnS QDs的磷光强度呈良好的线性关系y=0.0884x+0.2319,R²=0.991,方法检出限(3σ/n)为1.3μg/mL。该磷光探针适用于实际样品中Pt⁴⁺含量的测定。     

A consensus successive projections algorithm – multiple linear regression method for analyzing near infrared spectra

The successive projections algorithm (SPA) is widely used to select variables for multiple linear regression (MLR) modeling. However, SPA used only once may not obtain all the useful information of the full spectra, because the number of selected variables cannot exceed the number of calibration samples in the SPA algorithm. Therefore, the SPA-MLR method risks the loss of useful information. To make a full use of the useful information in the spectra, a new method named “consensus SPA-MLR” (C-SPA-MLR) is proposed herein. This method is the combination of consensus strategy and SPA-MLR method. In the C-SPA-MLR method, SPA-MLR is used to construct member models with different subsets of variables, which are selected from the remaining variables iteratively. A consensus prediction is obtained by combining the predictions of the member models. The proposed method is evaluated by analyzing the near infrared (NIR) spectra of corn and diesel. The results of C-SPA-MLR method showed a better prediction performance compared with the SPA-MLR and full-spectra PLS methods. Moreover, these results could serve as a reference for combination the consensus strategy and other variable selection methods when analyzing NIR spectra and other spectroscopic techniques.     

Ni2P和MoS2催化剂在二苯并噻吩加氢脱硫反应中的氢溢流效应

对分层装填的Ni₂P//MoS₂催化剂上的二苯并噻吩加氢脱硫反应进行了研究。结果表明,分层装填的Ni₂P/Al₂O₃和MoS₂/Al₂O₃催化剂在二苯并噻吩加氢脱硫反应中存在氢溢流效应,氢溢流有助于提高MoS₂催化剂的活性位密度和加氢脱硫反应速率。由于Ni₂P比NiS_x具有更强的氢分子解离能力,Ni₂P//MoS₂催化体系的氢溢流因子略高于NiS_x//MoS₂;相对于NiS_x,Ni₂P对MoS₂催化剂是更好的助剂。     

基于双功能单体的磁性双酚A印迹聚合物的制备及应用

以二氧化硅包覆的四氧化三铁为载体,双酚A(BPA)为模板分子,β-环糊精和4-乙烯基吡啶为二元功能单体,采用热聚合方法制备了对双酚A具有特异吸附性能的磁性印迹复合材料(mag-MIPs).采用透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)和振动样品磁强计(VSM)对该印迹复合材料进行了表征,并结合磁固相萃取(M-SPE)技术和高效液相色谱(HPLC)研究了其对双酚A的吸附行为,结果表明该印迹复合材料对双酚A具有良好的选择吸附能力.液相色谱检测结果表明,该磁性印迹复合材料可用于环境水样中双酚A的快速分离富集,回收率为90.51%~98.21%.     

Synthesis and Crystal Structure of Sm Cu7.73In3.27: a New 3D Framework Based on [Cu5In4M4]（M=Cu/In） Cluster

A new intermetallic compound, SmC u7.73In3.27, has been synthesized by solid-state reaction of the corresponding pure elements at high temperature, and structurally characterized by single-crystal X-ray diffraction study. SmC u7.73In3.27 crystallizes in tetragonal space group P4/mbm with a = 8.6213(4), c = 10.2538(9), V = 762.13(8) A3, Z = 4, Mr = 1018.90, Dc = 8.880 g/cm3, μ =38.244 mm-1, F(000) = 1789, and the final R = 0.0374 and w R = 0.0836 for 514 observed reflections with I 2σ(I). The structure of SmC u7.69In3.31 belongs to a new structure type and features a three-dimensional(3D) [Cu5In2M4](M = Cu/In) framework composed of [Cu5In4M4] clusters interconnected via sharing In atoms as well as Cu–In and In–In bonds. The Sm atoms are located in the one-dimensional(1D) tunnels along the c-axis. The structural relationship of the title compound with other similar Sm-Cu-In phases was also studied. Band structure calculations based on Density Functional Theory(DFT) method indicate that SmC u7.69In3.31 is metallic.